Search results

Flippers are a solenoid, like any other pinball solenoid, with two changes in that interacts with the ball. This connects via a shaft to the mechanism under

[[Stern_Pinball | Data East/Sega pinball]] used a board set with minor differences from 1987 to 1995. This boardset, like most hardware of [[File:De boardset.jpg‎|400px|thumb|left|Data East Standard DMD Board Set, this

After many years of suffering with System 80, Gottlieb launched its System 3. Finally, they resolved most of t * Gottlieb shrunk its two-spring drop target into a one-spring version with a smaller footprint, but that didn't play as well.

...e in PDF form on the Stern Pinball website. They are on the game specific pages of the Stern website. An index of games can be found in the right margin [ Service bulletins detailed any problems or issues with games that were discovered after they were released.

[[File:Wms sys9 boardset.jpg‎|300px|thumb|left|Williams System 9 Board Set from [[File:System11NothingBackbox.jpg|thumb|right|300px|Williams System 11 (nothing) B

[[File:3Prong Clipped.JPG|200px|left|thumb|Typical "clipped" 3rd prong on plug]]<b ...res, except green for ground), the neutral wire is typically the conductor with "ribbing" molded into the sheathing. When in doubt, perform a continuity t

...i.com/index.php?title=Glossary#Solid_State_.28SS.29 SS] or Solid State era with a conversion of a 1976 Williams [http://www.pinwiki.com/index.php?title=Glo IPDB links: [http://www.ipdb.org/machine.cgi?id=5647 Grand Prix SS version]&nbsp;&nbsp