Capcom Repair

Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.

1 Introduction

Capcom turned it hand to Pinball in 1995?. The company brough its electronics experience from designing video games, and the Capcom platform included a number of technological advances ignored by mainstream manufacturers. In particular, Capcom made extensive use of surface-mount parts and moved to the high performance 68xxx 32-bit processor.

2 Games

• Flipper Football
• Airborne
• Breakshot
• Pinball Magic
• Big Bang Bar
• Kingpin

3 Technical Info

Things like Data East's controller board was a copy of William's System 11 with some changes would go here.

5 Game Specific Problems and Fixes

Capcom used tiny connectors to the ball trough opto boards. Carefully wrap a small cable tie around it and it stays put better.

Capcom also used too fine a wire for switches. Easy to have one break off, which in turn can make that switch and others not work. First thing to check for when a switch doesn't work.

6 Repair Logs

Did you do a repair? Log it here as a possible solution for others.