Difference between revisions of "Chicago Gaming"
Jump to navigation
Jump to search
m (Added WIP comment on top of page) |
Ken Layton (talk | contribs) |
||
| Line 15: | Line 15: | ||
=Problems and Solutions= | =Problems and Solutions= | ||
==Power Problems== | ==Power Problems== | ||
| + | The power transformer, power supply board, and fuses are all located on the bottom floor of the machine. There are four fuses on the power supply board: | ||
| + | |||
| + | *F1 8 amp slow blow for the +45 volts to flippers | ||
| + | *F2 5 amp slow blow for the +24 volts | ||
| + | *F3 5 amp slow blow for the +38 volts to coils | ||
| + | *F4 3 amp slow blow for the +12 volts | ||
| + | |||
| + | There are a total of seven power indicating LED's on the power supply board: | ||
| + | |||
| + | *D1 indicates +45 volts present | ||
| + | *D2 indicates +24 volts present | ||
| + | *D3 indicates +38 volts present | ||
| + | *D4 indicates +12 volts unregulated present | ||
| + | *D5 indicates +5 volts present | ||
| + | *D6 indicates +12 volts regulated present | ||
| + | *D7 indicates -12 volts present | ||
| + | |||
==Solenoid Problems== | ==Solenoid Problems== | ||
==Lamp Problems== | ==Lamp Problems== | ||
Revision as of 12:25, 18 April 2012
 |
1 Introduction
Churchill Cabinet Company, who makes cabinets and playfields for other pinball manufacturers, decided to venture into making their own pinball machine. These machines were made strictly for the home market under the name of Chicago Gaming Company.
2 Games
- Vacation America, December 2003
3 Technical Info
Owner's Manual and schematics for Vacation America home model pinball.
File:Vacation America manual.pdf
4 Problems and Solutions
4.1 Power Problems
The power transformer, power supply board, and fuses are all located on the bottom floor of the machine. There are four fuses on the power supply board:
- F1 8 amp slow blow for the +45 volts to flippers
- F2 5 amp slow blow for the +24 volts
- F3 5 amp slow blow for the +38 volts to coils
- F4 3 amp slow blow for the +12 volts
There are a total of seven power indicating LED's on the power supply board:
- D1 indicates +45 volts present
- D2 indicates +24 volts present
- D3 indicates +38 volts present
- D4 indicates +12 volts unregulated present
- D5 indicates +5 volts present
- D6 indicates +12 volts regulated present
- D7 indicates -12 volts present