Difference between revisions of "Hot Tip"
m (→Mistake in Wiring of 3P2 on P/S Board: wording) |
|||
| Line 25: | Line 25: | ||
=== Hot Tip === | === Hot Tip === | ||
| − | === | + | === Schematic Error on Power Supply Board Wiring for 3P2 Connector === |
| − | The "Power Wiring" page | + | The "Power Wiring" schematics page has an error. It shows the DC ground wires coming out of the lamp and solenoid rectifiers as being wired to 3P2 pins 1 & 4 on the power supply board. This is wrong. It should be wired to pins 3 & 6. In fact, later System 3 games show the correct wiring on their schematics (Lucky Seven and Disco Fever have been verified). |
| − | + | One example of a Hot Tip that had the wiring incorrectly (matching the incorrect schematic) on 3P2 had the plug rotated 180 degrees in order to make it work and to correct for the wiring/schematic error. It is only possible to do this on OEM power supply boards because they use a pancake connector for 3J2. It was unclear if 3P2 was wired this way from the factory or if someone re-pinned it later, followed the incorrect schematics, later discovered that it didn't work, and rotated the plug. Modern replacement power supply boards use a fully shrouded connector for 3J2, so it is not possible to rotate the plug. | |
<BR><BR> | <BR><BR> | ||
---- | ---- | ||
Return to [[Williams_System_3_-_7#Games]] page. | Return to [[Williams_System_3_-_7#Games]] page. | ||
Revision as of 17:38, 11 October 2017
 |
| Manufacturer | System | Year | Model | Produced |
|---|---|---|---|---|
| Williams | System 3 | Jun 1984 | 477 | 4903 |
IPDB.org page for Hot Tip
Notable Features: First Williams regular production SS game / Chimes and no Electronic Sound Board / Drop Target 3-bank / Captive Ball
Hot Tip Playing Tips and Rule Sheet
1 System 3-7 Specific Issues
See Williams_System_3_-_7#Problems_and_Fixes
2 Game-Specific Issues
2.1 Hot Tip
2.2 Schematic Error on Power Supply Board Wiring for 3P2 Connector
The "Power Wiring" schematics page has an error. It shows the DC ground wires coming out of the lamp and solenoid rectifiers as being wired to 3P2 pins 1 & 4 on the power supply board. This is wrong. It should be wired to pins 3 & 6. In fact, later System 3 games show the correct wiring on their schematics (Lucky Seven and Disco Fever have been verified).
One example of a Hot Tip that had the wiring incorrectly (matching the incorrect schematic) on 3P2 had the plug rotated 180 degrees in order to make it work and to correct for the wiring/schematic error. It is only possible to do this on OEM power supply boards because they use a pancake connector for 3J2. It was unclear if 3P2 was wired this way from the factory or if someone re-pinned it later, followed the incorrect schematics, later discovered that it didn't work, and rotated the plug. Modern replacement power supply boards use a fully shrouded connector for 3J2, so it is not possible to rotate the plug.
Return to Williams_System_3_-_7#Games page.