Difference between revisions of "Williams System 9 - 11"
Jump to navigation
Jump to search
(Created page with "{{WIP}} ==Introduction== Put system info here ==Games== Put list of games that used this system here (including anything that might not have been pinball) ==Technical Info== Thi...") |
|||
| Line 14: | Line 14: | ||
===MPU Issues== | ===MPU Issues== | ||
| − | ==Power Supply Issues=== | + | ===Power Supply Issues=== |
===Display Driver Board=== | ===Display Driver Board=== | ||
Revision as of 09:50, 22 April 2011
 |
1 Introduction
Put system info here
2 Games
Put list of games that used this system here (including anything that might not have been pinball)
3 Technical Info
Things like Data East's controller board was a copy of William's System 11 with some changes would go here.
4 Problems and Fixes
4.1 Power Driver Issues
This may not apply to some, as MPU might have been part of it.
5 =MPU Issues
5.1 Power Supply Issues
5.2 Display Driver Board
Possibly doesn't apply to some, can't think of an example.
6 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
7 Repair Logs
Did you do a repair? Log it here as a possible solution for others.