Search results

...r legs at the rear of the game, and a pair of shorter legs at the front of the game. ...e of the leg, which can either go down part way or down the full length of the leg.

Click to go back to the [[Data_East/Sega/Stern_Pinball_Repair_Guides | Data East/Sega/Stern pinball ...gged, distributed, and embedded platform custom-designed for the rigors of the pinball machine environment".

Click to go back to the [[Bally/Stern_Electronics_Repair_Guides | Bally/Stern solid state repair gu ...sound board. The game also used -17/-35 era 6/7 digit displays located on the lamp insert board.]]

...produced several "traditional form factor" solid-state pinball machines in the mid-1970s. ...f '76]" first, as the two manufacturers released their titles right around the same time. Micro's specific release date does not appear to have been recor

...ball machines were manufactured from the 1930's until the mid 1970's, when the transition to solid state machines was made. From that span of 40 plus yea ...the 1950's until 1977 made by four of the largest pinball manufacturers at the time. Manufacturers included in this guide are: