Difference between revisions of "EM Repair"
Jump to navigation
Jump to search
(→Games) |
|||
| Line 6: | Line 6: | ||
==Games== | ==Games== | ||
| + | The "Big Three" manufacturers were Gottlieb, Williams and Bally. The "best of the rest" would probably include Chicago Coin and Midway as well as some foreign brands such as Recel, Playmatic and Rally. There were many companies that only produced a few games, especially early on. | ||
| − | + | A quick search of the Internet Pinball Database: | |
| − | + | ||
| − | + | http://www.ipdb.org/search.pl?gtype=EM&searchtype=advanced | |
| + | |||
| + | Shows that between all the manufacturers, there are over 3403 games within this very broad category. | ||
| + | |||
| + | |||
| + | --[[User:Newmantjn|Newmantjn]] 18:33, 22 April 2011 (BST) | ||
==Technical Info== | ==Technical Info== | ||
Revision as of 12:33, 22 April 2011
 |
1 Introduction
Put system info here
2 Safety
3 Games
The "Big Three" manufacturers were Gottlieb, Williams and Bally. The "best of the rest" would probably include Chicago Coin and Midway as well as some foreign brands such as Recel, Playmatic and Rally. There were many companies that only produced a few games, especially early on.
A quick search of the Internet Pinball Database:
http://www.ipdb.org/search.pl?gtype=EM&searchtype=advanced
Shows that between all the manufacturers, there are over 3403 games within this very broad category.
--Newmantjn 18:33, 22 April 2011 (BST)
4 Technical Info
4.1 Start-up Sequences
4.2 Schematics
5 Problems and Fixes
5.1 Coils
5.2 Relays
5.3 Stepper Units
5.4 Score Reels
5.5 Drop Targets
5.6 Roto Targets
5.7 Pop Bumpers
5.8 Kickers/Slingshots
5.9 Flippers
5.10 Power Supply Issues
6 Test Procedures
6.1 Testing with a Jumper Wire
6.2 Testing with a Test Light
7 Game Specific Problems and Fixes
Example would be servo controller on Independence Day pinball
8 Repair Logs
Did you do a repair? Log it here as a possible solution for others.