Difference between revisions of "Pinball Part Datasheets"

From PinWiki
Jump to navigation Jump to search
(→‎UVEPROMs: Created subsection...Added first item, 2716)
Line 25: Line 25:
 
!class="unsortable" | Datasheet Link  
 
!class="unsortable" | Datasheet Link  
 
|-
 
|-
| 2716 || 2Kx8 || DIP-24 || http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html
+
| 2716 || <center>2Kx8</center> || <center>DIP-24</center> || http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html
 
|-
 
|-
 
|}
 
|}

Revision as of 12:08, 28 May 2011

1 Optoelectronics

Part Number Type Package Datasheet Link Typical Uses
QED123 IR emitter T1-3/4 http://www12.fairchildsemi.com/ds/QE/QED123.pdf WPC, maybe others
QSD724 IR Receiver T1-3/4 http://datasheet.octopart.com/QSD724-Fairchild-datasheet-8132.pdf WPC original
QSD124 IR Receiver T1-3/4 http://www.fairchildsemi.com/ds/QS/QSD124.pdf WPC substitute, maybe others

2 UVEPROMs

Part Number Description Package Datasheet Link
2716
2Kx8
DIP-24
http://www.datasheetarchive.com/pdf-datasheets/Datasheets-14/DSA-276496.html

3 Transistors

Part Number Type Volts Amps Package Datasheet Link Typical Uses
TIP102 NPN 100V 8A TO-220 http://www.fairchildsemi.com/ds/TI/TIP100.pdf Solenoids, flashers and lamp matrix low side. Use in place of TIP 120 (a TIP102 more robust).
TIP107 NPN 100V 8A TO-220 http://www12.fairchildsemi.com/ds/TI/TIP105.pdf Lamp matrix high side
TIP36C PNP 100V 25A TO-247 http://www.st.com/stonline/books/pdf/docs/5071.pdf Flippers; high power solenoid
MPSA13 NPN 30V 1.2A TO-92 http://www.fairchildsemi.com/ds/MP/MPSA13.pdf Gottlieb Sys80 Driver Board
IRL540 N FET 100V 28A TO-220 http://www.st.com/stonline/books/pdf/docs/5071.pdf Stern (replacement) flashers, solenoids, lamp matrix low side
22NE10L N FET 100V 22A TO-220 http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00001959.pdf Stern flashers, solenoids, lamp matrix low side

| New entry || Type || xxV || xxA || TO- || Put link here || Purpose |}

4 Integrated Circuits

Integrated circuits (ICs) in older SS machines are usually Dual-Inline (DIP) packages. Part numbers for ICs may have prefixes and suffixes that specify details about the part. For example, SN74LS244N is a 74LS244 device. SN indicates the manufacturer (Texas Instruments) and N indicates a 20-pin DIP package. The package type suffix may vary by manufacturer. Some parts may have additional suffixes that indicate the temperature range of the part.

For information on TTL part numbering see 7400 Series Wikipedia article section on "Part Numbering Schemes".