The Simpsons Pinball Party

From PinWiki
Revision as of 22:40, 27 November 2016 by Chibler (talk | contribs) (Started section on TSPP TV PCB)
Jump to navigation Jump to search

The Simpsons Pinball Party (specific page)

This looks like a "hack", but it is a factory installed capacitor.


Buried in the wire harness to the left of the I/O Driver board you'll find a 10,000uf/16V capacitor that appears to be a "hack". This is, in fact, a factory installed capacitor.

The Playfield TV Display

Front view of the TV PCB board.


Rear view of the TV PCB board, showing the circuit layout.


A fractured trace under "Block 1" and a view of the surface mount 68 ohm resistors.


Retrieved from "https://www.pinwiki.com/wiki/index.php?title=The_Simpsons_Pinball_Party&oldid=16664"