Mephisto
 |
1 Introduction
This pinball machine was manufactured in 1987 by a Spanish company, Universal de Desarrollos Electronics, S.A. Their various trade names were Unidesa/Cirsa/Stargame.
It is horror-themed and has both 2 and 3-ball multiball.
The boardset is unique and the playfield parts are as well.
The manual for the game is in Spanish. The available scans of the manual available on the internet (see the manual on IPDB) are not good quality and there are some mistakes (to be pointed out below).
2 Technical Info
There are 4 major boards used in this game:
- Power Feed Board (Carta Alimentacion)
- Solenoid Driver Board (Carta Potencia)
- CPU Board (Carta Control)
- Sound Board (Carta Sonido)
The game used LED displays and there are 4 displays for the players and a credit/match display. As a result, there is not high voltage generation in the machine.
The basic architecture of the game's electronics is:
- The Transformer sends various A/C voltages to the Power Feed Board
- The Power Feed Board turns most of these A/C voltages to D/C voltages through the use of 4 bridge rectifiers and sends those voltages to other boards in the game. Also the Power Feed Board holds most of the fuses on the game (the only exception being the main fuse, which is located in the bottom of the cabinet, next to the transformer).
- The Solenoid Driver Board is responsible for driving the solenoids (actually coils and flashers) in the game.
- The CPU Board runs the game code and is responsible for driving the displays, the feature lamps, and handling switches
- The Sound Board generates sound and speech
More t.b.s.
2.1 Power Feed Board
More t.b.s.
2.2 Solenoid Driver Board
t.b.s.
2.3 CPU Board
t.b.s.
2.4 Sound Board
t.b.s.
2.5 Flasher Lamps
This game uses two types of flasher lamps:
- 12V 15W (9x)
- 12V 3W (2x)
Lamps with these specs are difficult to find.
The original 12V 15W lamps had a large bayonet base (BA15s) and smaller glass bulb shape (G-6). Identical in size (but not volts or watts) to a standard #89 lamp. Today, the only available 12V 15W replacement with a BA15s base is a #7533 bulb, which is a longer (2.0") and wider (1.04") glass bulb with a S-8 glass bulb shape. In comparison, the original lamps with a G-6 glass bulb shape were 1.44" long and 0.75" wide. The #7533 is not very common, but is still manufactured by CEC Industries. Use of this bulb requires some rework of the mounts for the bulbs to add spacers and longer screws, and in some cases (i.e. the lamps used for the "eyes" behind the backglass), cutting the plastic tubes that surround the bulbs to focus the light and replacing them with larger tubes. A downside to using #7533 bulbs is the average life hours is short, namely 75 hours. Another more direct replacement may be #15025 bulbs. These have the exact electrical specs needed (12V 15W), but also have the smaller glass bulb size (1.48" long and 0.75" wide) in the BA15s base. Testing of #15025 lamps is pending.
The 12V 3W flasher lamps have a smaller wedge base. The closest available replacement is a #161 bulb that is 14V and 2.66W. This has been tested to work in the game.
Another option is to change the resistors used to drop the voltage for the flashers, so that more commonly available lamps with the smaller G-6 glass bulb shape could be used. Each set of flashers uses a resistor board (sometimes 1 board is used for a single flasher, sometimes multiple flashers share a board) to drop the voltage used by the flashers. In theory, you could determine a different mix of resistors to use to get the desired voltage for the flasher lamps you want to use. If anyone has any experience doing this, please share the details in this forum...
Another thing to note is where multiple flashers are used together to be driven by a common transistor (i.e., the skull, the eyes on the backglass, the sun on the backglass, the bat in the topper) they are wired in series. So if a single bulb buns out in the series, the whole set will not light.
More details are t.b.s.
3 Charts
3.1 Fuse Chart
| Fuse | Type | Usage | Location |
|---|---|---|---|
| F1 | 7A SB | GI | Power Feed Board |
| F2 | 7A SB | GI | Power Feed Board |
| F3 | 5A SB | Flippers | Power Feed Board |
| F4 | 4A SB | Solenoids | Power Feed Board |
| F5 | 2A SB | Audio | Power Feed Board |
| F6 | 7A SB | Feature Lamps | Power Feed Board |
| F7 | 7A SB | A/C Leg 1 to PR4 (used to generate 12VDC/5VDC) | Power Feed Board |
| F8 | 7A SB | A/C Leg 2 to PR4 (used to generate 12VDC/5VDC) | Power Feed Board |
| X | 2A SB | Main | Cabinet |
3.2 Lamp Chart
| Lamp | Description |
|---|---|
| 1 | Top Lane (center) |
| 2 | Top Lane (right) |
| 3 | 30K When Lit |
| 4 | Not used |
| 5 | Not used |
| 6 | Not used |
| 7 | Multiball Arrow 1 (top) |
| 8 | Multiball Arrow 2 |
| 9 | Multiball Arrow 3 |
| 10 | Multiball Arrow 4 |
| 11 | Pop Bumper (top) |
| 12 | Pop Bumper (bottom) |
| 13 | Pop Bumper (right) |
| 14 | Ramp Arrow (right) |
| 15 | Left Ramp Arrow 1 (top) |
| 16 | Left Ramp Arrow 2 (middle) |
| 17 | Left Ramp Arrow 3 (bottom) |
| 18 | Drop Target Bonus (top) |
| 19 | Drop Target Bonus (middle) |
| 20 | Bonus (10K) |
| 21 | Bonus (9K) |
| 22 | Bonus (8K) |
| 23 | Bonus (7K) |
| 24 | Bonus (6K) |
| 25 | Bonus (5K) |
| 26 | Bonus (4K) |
| 27 | Bonus (3K) |
| 28 | Bonus (2K) |
| 29 | Bonus (1K) |
| 30 | Standup Target (top) |
| 31 | Standup Target (middle) |
| 32 | Standup Target (bottom) |
| 33 | Left Inlane |
| 34 | Not used |
| 35 | Right Inlane |
| 36 | Right Outlane/Gate |
| 37 | X5 |
| 38 | X4 |
| 39 | X3 |
| 40 | Left Special |
| 41 | Right Special |
| 42 | Shoot Again |
| 43 | Shooter Lane (1K pts) |
| 44 | Shooter Lane (15K pts) |
| 45 | Shooter Lane (30K pts) |
| 46 | Backglass (Game Over) |
| 47 | X2 |
| 48 | Bonus (30K) |
| 49 | Bonus (20K) |
| 50 | Multiball Arrow 5 |
| 51 | Backglass (High Score) |
| 52 | Extra Ball |
| 53 | Drop Target Bonus (bottom) |
| 54 | Multiball Arrow 6 (bottom) |
| 55 | Top Lane (left) |
| 56 | Backglass "O" |
| 57 | Backglass "T" |
| 58 | Backglass "S" |
| 59 | Backglass "I" |
| 60 | Backglass "H" |
| 61 | Backglass "P" |
| 62 | Backglass "E" |
| 63 | Backglass "M" |
| Col 0 J3.2-10 |
Col 1 J3.2-9 |
Col 2 J3.2-8 |
Col 3 J3.2-1 |
Col 4 J3.2-3 |
Col 5 J3.2-2 |
Col 6 J3.2-4 |
Col J3.2-6 | |
|---|---|---|---|---|---|---|---|---|
| Row 0 J3.1-1 Red-Brn TR1 |
42 |
1 |
48 |
52 |
46 |
51 |
4 |
5 |
| Row 1 J3.1-2 Red-Yel TR2 |
54 |
2 |
49 |
3 |
7 |
0 |
36 |
6 |
| Row 2 J3.1-4 Red-Blk TR3 |
50 |
25 |
20 |
15 |
8 |
14 |
35 |
34 |
| Row 3 J3.1-6 Red-Gry TR4 |
10 |
26 |
21 |
16 |
30 |
37 |
53 |
40 |
| Row 4 J3.1-5 Red-Vio TR5 |
9 |
27 |
22 |
17 |
31 |
38 |
19 |
41 |
| Row 5 J3.1-8 Red-Blu TR6 |
43 |
28 |
23 |
44 |
32 |
39 |
18 |
45 |
| Row 6 J3.1-9 Yel-Vio TR7 |
11 |
29 |
24 |
12 |
33 |
47 |
13 |
55 |
| Row 7 J3.1-10 Red-Grn TR8 |
56 |
57 |
58 |
59 |
60 |
61 |
62 |
63 |
3.3 Solenoids
| Sol. No | Solenoid description | Connector | Wire Color | Coil/Flasher |
|---|---|---|---|---|
| 1 | not used | |||
| 2 | Top Pop Bumper | J11-3 | Yel-Vio | Coil 1000/45 |
| 3 | Right Pop Bumper | J11-2 | Yel-Vio | Coil 1000/45 |
| 4 | Bottom Pop Bumper | J11-5 | Yel-Vio | Coil 1000/45 |
| 5 | not used | |||
| 6 | not used | |||
| 7 | not used | |||
| 8 | Left Eject Hole | J12-7 | Wht-Gry | Coil 1300/26 |
| 9 | Center Eject Hole | J12-6 | Red-Grn | Coil 1300/26 |
| 10 | Diverter Release | J12-3 | Yel-Blk | Coil 1400/20 |
| 11 | Ramp Diverter | J12-2 | Brn-Vio | Coil 1300/26 |
| 12 | 3-bank Drop Target Reset | J12-4 | Brn-Yel | Coil 1450/50 |
| 13 | Single Drop Target Reset | J12-5 | Grn-Blk | Coil 1200/40 |
| 14 | Trough Eject | J12-10 | Red-Blk | Coil 1300/26 |
| 15 | Right Eject Hole | J12-9 | Brn-Grn | Coil 1300/26 |
| 16 | Flasher (skull) | J13-8 | Brn-Red | Flasher 12v 3w (2x) |
| 17 | Flasher (top left) | J13-6 | Red-Yel | Flasher 12v 15w (1x) |
| 18 | Flasher (eyes on BG) | J13-3 | Vio-Blu | Flasher 12v 15w (2x) |
| 19 | Flasher (bat) | J13-2 | Red-Blu | Flasher 12v 15w (3x) |
| 20 | Flasher (sun on BG) | J13-4 | Grn-Red | Flasher 12v 15w (2x) |
| 21 | Flasher (top right) | J13-5 | Wht-Blu | Flasher 12v 15w (1x) |
| 22 | Knocker | J13-10 | Wht-Grn | Coil 1000/35 |
| 23 | Gate | J13-9 | Yel-Red | Coil 4000/16 |
3.4 Switch Matrix
| Col 0 J4.1-10 |
Col 1 J4.1-9 |
Col 2 J4.1-8 |
Col 3 J4.1-7 |
Col 4 J4.1-6 |
Col 5 J4.1-5 |
Col 6 J4.1-4 | |
|---|---|---|---|---|---|---|---|
| Row 0 J4.2-6 Grn-Brn IC31 |
05 |
11 |
17 |
23 |
29 |
35 |
41 |
| Row 1 J4.2-5 Grn-Yel IC31 |
04 |
10 |
16 |
22 |
28 |
34 |
40 |
| Row 2 J4.2-4 Grn-Blk IC31 |
03 |
09 |
15 |
21 |
27 |
33 |
39 |
| Row 3 J4.2-3 Grn-Gry IC31 |
02 |
08 |
14 |
20 |
26 |
32 |
38 |
| Row 4 J4.2-2 Grn-Vio IC31 |
01 |
07 |
13 |
19 |
25 |
31 |
37 |
| Row 5 J4.2-1 Grn-Blu IC31 |
00 |
06 |
12 |
18 |
24 |
30 |
36 |
3.5 Connection Charts
The following charts show the connections on each of the boards.
3.5.1 Power Feed Board
| Conn-Pin | Purpose | Wire Color | To/From |
|---|---|---|---|
| J25-1 | |||
| J25-2 | GND 9.3VAC | Wht | From Transformer |
| J25-3 | 9.3VAC | Wht-Blk | From Transformer |
| J25-4 | |||
| J25-5 | |||
| J25-6 | 9.3VAC | Wht-Blk | From Transformer |
| J25-7 | |||
| J25-8 | 16VAC | Grn-Wht | From Transformer |
| J25-9 | |||
| J25-10 | GND 16VAC | Yel-Red | From Transformer |
| J26-1 | 16VAC (audio) | Wht-Vio | From Transformer |
| J26-2 | GND 16VAC (audio) | Gry | From Transformer |
| J26-3 | Earth GND | Yel-Grn | From Transformer |
| J26-4 | GND 50VAC (coils) | Blk-Wht | From Transformer |
| J26-5 | |||
| J26-6 | 50VAC | Red | From Transformer |
| J26-7 | |||
| J26-8 | KEY | ||
| J26-9 | 50VAC (flippers) | Yel | From Transformer |
| J26-10 | |||
| J27-1 | GND 50VAC (flippers) | Yel-Brn | From Transformer |
| J27-2 | |||
| J27-3 | |||
| J27-4 | |||
| J27-5 | GND 6.3VAC | Brn-Grn | From Transformer |
| J27-6 | GND 6.3VAC | Brn-Grn | From Transformer |
| J27-7 | KEY | ||
| J27-8 | |||
| J27-9 | GND 6.3VAC | Gry-Blk | From Transformer |
| J27-10 | GND 6.3VAC | Gry-Blk | From Transformer |
| J28-1 | 16V | Wht-Blk | To 33,000uF/40V Cap |
| J28-2 | GND 16V | Brn-Grn | To 33,000uF/40V Cap |
| J29-1 | V GI | Gry-Blk | To GI via F1-1 |
| J29-2 | V GI | Gry-Blk | To GI via F1-2 |
| J29-3 | V GI | Gry-Blk | To GI via B1-5 |
| J29-4 | V GI | Gry-Blk | To GI via B1-6 |
| J29-5 | GND GI | Brn-Grn | To GI via F1-3 |
| J29-6 | GND GI | Brn-Grn | To GI via F1-4 |
| J29-7 | GND GI | Brn-Grn | To GI via B1-7 |
| J29-8 | GND GI | Brn-Grn | To GI via B1-8 |
| J29-9 | KEY | ||
| J29-10 | GND Flipper (left) | Gry-Blk | To Left Flipper via B1-9 & R1-1 |
| J30-1 | GND Flipper (right) | Blu-Vio | To Right Flipper via B1-10 & R1-2 |
| J30-2 | |||
| J30-3 | 50VDC Flipper | Yel | To Flipper via B1-3 |
| J30-4 | 50VDC Flipper | Yel | To Flipper via B1-4 |
| J30-5 | |||
| J30-6 | 50VDC (coils) | Red | To Coils via F1-8 & direct |
| J30-7 | 50VDC (coils) | Red | To Coils via B1-1 & B1-2 |
| J31-1 | |||
| J31-2 | GND 50VDC (coils) | Orn | To J10-4 |
| J31-3 | |||
| J31-4 | GND +12VDC (audio) | Wht-Vio | To J1.2-2 |
| J31-5 | +12VDC (audio) | Gry | to J1.2-1 & J10-3 |
| J31-6 | KEY | ||
| J31-7 | |||
| J31-8 | GND Feature Lamps | Brn-Grn | To J1.2-7 |
| J31-9 | |||
| J31-10 | Feature Lamps | Gry-Blk | To J1.2-6 |
| J32-1 | |||
| J32-2 | +12VDC | Wht-Blk | To J1.1-1 |
| J32-3 | |||
| J32-4 | -12VDC | Wht | To J1.2-5 |
| J32-5 | KEY | ||
| J32-6 | +5VDC | Yel | To J1.1-7 |
| J32-7 | |||
| J32-8 | GND +5VDC | Vio | To J1.1-6 |
| J33-1 | Inh. Flippers | Red-Wht | To J1.1-3 |
| J33-2 | KEY | ||
| J33-3 | Inh. GI | Blu-Red | To J1.1-2 |
| J33-4 | Inh. Coils | Blk-Wht | To J10-1 |
| J33-5 | Inh. Feature Lamps | Yel-Red | To J1.1-4 |
3.5.2 Solenoid Driver Board
| Conn-Pin | Purpose | Wire Color | To/From |
|---|---|---|---|
| J9-1 | -5V | Ribbon | From J8-1 |
| J9-2 | -5V | Ribbon | From J8-2 |
| J9-3 | Ribbon | From J8-3 | |
| J9-4 | 5V | Ribbon | From J8-4 |
| J9-5 | 5V | Ribbon | From J8-5 |
| J9-6 | 5V | Ribbon | From J8-6 |
| J9-7 | GND 5V | Ribbon | From J8-7 |
| J9-8 | GND 5V | Ribbon | From J8-8 |
| J9-9 | CON 2 | Ribbon | From J8-9 |
| J9-10 | Ribbon | From J8-10 | |
| J9-11 | GND 5V | Ribbon | From J8-11 |
| J9-12 | CON 1 | Ribbon | From J8-12 |
| J9-13 | BD 7 | Ribbon | From J8-13 |
| J9-14 | BD 6 | Ribbon | From J8-14 |
| J9-15 | BD 5 | Ribbon | From J8-15 |
| J9-16 | BD 4 | Ribbon | From J8-16 |
| J9-17 | BD 3 | Ribbon | From J8-17 |
| J9-18 | BD 2 | Ribbon | From J8-18 |
| J9-19 | BD 1 | Ribbon | From J8-19 |
| J9-20 | BD 0 | Ribbon | From J8-20 |
| J10-1 | Inh. Coils | Blk-Wht | From J33-4 |
| J10-2 | KEY | ||
| J10-3 | V Audio | Gry | From J31-5 |
| J10-4 | GND Coils | Orn | From J31-2 |
| J10-5 | |||
| J10-6 | |||
| J11-1 | GND Coils | Orn | To Coils via B1-11 |
| J11-2 | Pop Bumper (right) | Grn-Brn | To Right PB via B1-12 |
| J11-3 | Pop Bumper (top) | Yel-Vio | To Top PB via B1-13 |
| J11-4 | KEY | ||
| J11-5 | Pop Bumper (bottom) | Yel-Blu | To Bottom PB via B1-14 |
| J11-6 | |||
| J11-7 | |||
| J11-8 | |||
| J11-9 | |||
| J11-10 | |||
| J12-1 | GND Coils | Orn | To Coils directly |
| J12-2 | Ramp Diverter | Brn-Vio | Via B1-16 |
| J12-3 | Diverter Release | Yel-Blk | Via B1-17 |
| J12-4 | Drop Target 3-bank Reset | Brn-Yel | Via B1-18 |
| J12-5 | Drop Target 1-bank Reset | Grn-Blk | Via B1-19 |
| J12-6 | Eject Hole (top) | Red-Grn | Via B1-21 |
| J12-7 | Eject Hole (left) | Wht-Gry | Via B1-20 |
| J12-8 | KEY | ||
| J12-9 | Eject Hole (right) | Brn-Grn | Via B1-22 |
| J12-10 | Ball Trough | Red-Blk | Via B1-23 |
| J13-1 | GND Coils | Orn | To Coils via F1-5 |
| J13-2 | Flash Lamp (Bat) | Red-Blu | Directly |
| J13-3 | Flash Lamp (Eyes on BG) | Yel-Blk | Via F1-6 |
| J13-4 | Flash Lamp (Sun on BG) | Brn-Yel | Via F1-7 |
| J13-5 | Flash Lamp (top right) | Grn-Blk | Via B1-24 |
| J13-6 | Flash Lamp (top left) | Red-Grn | Via B1-25 |
| J13-7 | KEY | ||
| J13-8 | Flash Lamp (Bat) | Red-Grn | Directly |
| J13-9 | Gate | Yel-Red | Via B1-27 |
| J13-10 | Knocker | Wht-Grn | Directly |
3.5.3 CPU Board
| Conn/Pin | Purpose | Wire Color | To/From |
|---|---|---|---|
| J1.1-1 | +12V Control | Wht-Blk | J32-2 |
| J1.1-2 | Inh. GI | Blu-Red | J33-3 |
| J1.1-3 | Inh. Flippers | Red-Blk | J33-1 |
| J1.1-4 | Inh. Feature Lamps | Yel-Red | J33-5 |
| J1.1-5 | KEY | ||
| J1.1-6 | GND 5VDC | Vio | PS Bd J32-8 |
| J1.1-7 | 5VDC | Yel | PS Bd J32-6 |
| J1.2-1 | -12V audio | Gry | J31-5 |
| J1.2-2 | GND -12V audio | Wht-Vio | J31-4 |
| J1.2-3 | |||
| J1.2-4 | KEY | ||
| J1.2-5 | -12V Control | Wnt | J32-4 |
| J1.2-6 | Feature Lamps | Gry-Blk | J31-10 |
| J1.2-7 | GND Feature Lamps | Brn-Grn | J31-8 |
| J2.1-1 | |||
| J2.1-2 | |||
| J2.1-3 | OE? | Grn-Blk | J23-5 via F2-11 |
| J2.1-4 | Data Out | Grn-Blu | J23-4 via F2-12 |
| J2.1-5 | Strobe | Grn-Wht | J23-7 via F2-13 |
| J2.1-6 | Clk | Grn-Red | J23-6 via F2-14 |
| J2.1-7 | 5VDC | Blu | J23-2 via F2-15 |
| J2.1-8 | GND 5VDC | Gry | J23-1 via F2-16 |
| J2.2-1 | GND Audio | Blk | J14.2-5 |
| J2.2-2 | KEY | ||
| J2.2-3 | V Audio | Red | J14.2-4 |
| J2.2-4 | 5VDC | Yel | J14.2-1 |
| J2.2-5 | GND 5VDC | Wht | J14.2-3 |
| J2.3-1 | |||
| J2.3-2 | HSIC | Wht-Blk | J14.1-5 |
| J2.3-3 | RESET | Wht-Blu | J14.1-1 |
| J2.3-4 | RxD | Wht-Brn | J14.1-2 |
| J2.3-5 | |||
| J2.3-6 | TxD | Wht-Grn | J14.1-4 |
| J2.3-7 | HSOC | Wht-Red | J14.1-3 |
| J3.1-1 | Lamp Row 0 | Red-Brn | Via T1-1 |
| J3.1-2 | Lamp Row 1 | Red-Yel | Via T1-2 |
| J3.1-3 | KEY | ||
| J3.1-4 | Lamp Row 2 | Red-Blk | Via T1-3 |
| J3.1-5 | Lamp Row 4 | Red-Vio | Via T1-5 |
| J3.1-6 | Lamp Row 3 | Red-Gry | Via T1-4 |
| J3.1-7 | |||
| J3.1-8 | Lamp Row 5 | Red-Blu | Via T1-6 |
| J3.1-9 | Lamp Row 6 | Yel-Vio | Via T1-7 |
| J3.1-10 | |||
| J3.2-1 | Lamp Col 3 | Vio-Red | Via T1-11 |
| J3.2-2 | Lamp Col 5 | Orn-Yel | Via T1-13 |
| J3.2-3 | Lamp Col 4 | Brn-Grn | Via T1-12 |
| J3.2-4 | Lamp Col 6 | Vio-Grn | Via T1-14 |
| J3.2-5 | |||
| J3.2-6 | Lamp Col 7 | Brn-Blk | Via T1-15 |
| J3.2-7 | KEY | ||
| J3.2-8 | Lamp Col 2 | Brn-Yel | Via T1-10 |
| J3.2-9 | Lamp Col 1 | Grn-Red | Via T1-9 |
| J3.2-10 | Lamp Col 0 | Brn-Red | Via T1-8 |
| J4.1-1 | |||
| J4.1-2 | |||
| J4.1-3 | |||
| J4.1-4 | Switches - Col 6 | Wht-Red | Via T1-28 |
| J4.1-5 | Switches - Col 5 | Wht-Blu | Via T1-27 |
| J4.1-6 | Switches - Col 4 | Wht-Vio | Via T1-26 |
| J4.1-7 | Switches - Col 3 | Wht-Gry | Via T1-25 |
| J4.1-8 | Switches - Col 2 | Wht-Blk | Via T1-24 |
| J4.1-9 | Switches - Col 1 | Wht-Yel | Via T1-23 |
| J4.1-10 | Switches - Col 0 | Wht | Via T1-22 |
| J4.2-1 | Switches - Row 5 | Grn-Blu | Via T1-21 |
| J4.2-2 | Switches - Row 4 | Grn-Vio | Via T1-20 |
| J4.2-3 | Switches - Row 3 | Grn-Gry | Via T1-19 |
| J4.2-4 | Switches - Row 2 | Grn-Blk | Via T1-18 |
| J4.2-5 | Switches - Row 1 | Grn-Yel | Via T1-17 |
| J4.2-6 | Switches - Row 0 | Grn-Brn | Via T1-16 |
| J4.2-7 | |||
| J4.2-8 | |||
| J6-1 | Advance button | Red-Blu | Via M1-9 |
| J6-2 | |||
| J6-3 | Test button | Wht-Vio | Via M1-10 |
| J6-4 | |||
| J6-5 | GND 5VDC | Brn | Via M1-11 |
| J7-1 | GND 5VDC | Blk | Via T1-33 |
| J7-2 | |||
| J7-3 | |||
| J7-4 | |||
| J7-5 | CB-6 | Brn | Via T1-21 |
| J7-6 | |||
| J7-7 | |||
| J7-8 | CB-1 | Grn | Via T1-30 |
| J7-9 | CB-3 | Vio | Via T1-31 |
| J7-10 | |||
| J8-1 | -5V | Ribbon | J9-1 |
| J8-2 | -5V | Ribbon | J9-2 |
| J8-3 | Ribbon | J9-3 | |
| J8-4 | 5V | Ribbon | J9-4 |
| J8-5 | 5V | Ribbon | J9-5 |
| J8-6 | 5V | Ribbon | J9-6 |
| J8-7 | GND 5V | Ribbon | J9-7 |
| J8-8 | GND 5V | Ribbon | J9-8 |
| J8-9 | CON 2 | Ribbon | J9-9 |
| J8-10 | Ribbon | J9-10 | |
| J8-11 | GND 5V | Ribbon | J9-11 |
| J8-12 | CON 1 | Ribbon | J9-12 |
| J8-13 | BD 7 | Ribbon | J9-13 |
| J8-14 | BD 6 | Ribbon | J9-14 |
| J8-15 | BD 5 | Ribbon | J9-15 |
| J8-16 | BD 4 | Ribbon | J9-16 |
| J8-17 | BD 3 | Ribbon | J9-17 |
| J8-18 | BD 2 | Ribbon | J9-18 |
| J8-19 | BD 1 | Ribbon | J9-19 |
| J8-20 | BD 0 | Ribbon | J9-20 |
3.5.4 Sound Board
t.b.s.
Return to Unidesa/Cirsa/Stargame page.