Rollergames

1 Game Information

Manufacturer	System	Year	Model	Produced
Williams	System 11C	1990	576	5,000

IPDB Link (including software and schematics)

Rollergames Playing Tips and Rule Sheet

Rollergames Shop Guide

2 System 11 Specific Issues

See System 11 Specific Issues

3 Game-Specific Issues

3.1 Several Solenoids Not Firing, But All Auxiliary Driver Board Fuses Test Fine

If the following solenoids do not work, and fuse F4 on the auxiliary power driver board is known good, then suspect a blown fuse underneath the playfield.

• Sol. 13 Upper kickback
• Sol. 14 Lock kickback
• Sol. 18 Ramp diverter (top left corner)
• Sol. 20 Left outlane kickback
• Sol. 22 - Deep freeze magnet

Just below the drop target assy., and hidden beneath the wiring harness is a 2-1/2A slo-blow fuse / fuse holder

Fuse located under playfield, which powers solenoids 13, 14, 18, 20, & 22

All of these solenoids use a purple-yellow wire to power them. The fuse and fuse holder are located just below the drop target assembly (when the playfield is down). It is hidden beneath the wiring harness, and typically not visible at first glance.

3.2 Updated Solenoid Flasher Map

Updated solenoid / flasher map for Rollergames

The manual (page 71) does not specify where specific flashers are located. An updated page showing the flasher locations is at the left.

Return to Williams System 9 and 11 main page.