Bram Stoker's Dracula

From PinWiki
Revision as of 14:21, 4 September 2011 by Chibler (talk | contribs)
Jump to navigation Jump to search
ExclamationPoint.jpg
Note: This page is a work in progress. Please help get it to a completed state by adding any useful information to it.


Manufacturer System Year Model Produced
Williams WPC-Fliptronics 1993 50001 6,801


Rule Sheet...see Dracula listing in IPDB [1] Bram Stoker's Dracula Shop Guide


1 WPC Specific Issues

See WPC Specific Issues

2 Game-Specific Issues

Castle Lock releases more than one ball at a time
If your Castle Lock "disappearing post" mechanism is worn, allowing some play in the steel rod that holds the balls in the lock mechanism, more than one ball may be released at a time. Balls may also "skip over" the lock mechanism. The solution is to either purchase a new bracket, or insert a "nyliner" into the "hogged out" top hole of the bracket.

Balls "skip over" lock mechanism (aka disappearing post)
Improper adjustment of the wireform height may also cause balls to skip over the lock mechanism. You can lower the wireform height by shortening the plastic post that supports it. You'll have to remove the screws from the right ramp over the right sling, and perhaps the decorative "castle".


Return to Williams WPC page.